Dirty electricity is a growing concern for many of us and it is pretty much everywhere and you can’t escape it. In this article I will go over what the best dirty electricity filters are, what it is, what causes it and if it’s harmful.
Top Dirty Electricity Filters
With so many filters on the market it can be hard to choose which one is the best for you. That’s why we have done all the research for you and put together a list of the top contenders that have the best reputation and reviews.
You might recognize some of the household names like Greenwave and Stetzerizer but some of the others contenders might be worth considering as well. If you are looking for the best filter keeping reading to see our top choices.
The highest rated dirty electricity filter is by Greenwave, they use the newest EMI filtering technology. Note: You will need multiple units.
1. Greenwave Filters
If you are looking for a way to significantly reduce the amount of dirty electricity then you can’t go wrong with Greenwave dirty electricity filters.
All their filters use EMI filtering technology that is state of the art that will take care of any spikes or erratic surges while still maintaining the functionality of the outlet.
These filters are very straightforward to use all you have to do is plug them into any power strip or electrical outlet and you will get results immediately.
You don’t have to worry about losing a plug either because they have a built-in outlet at the bottom.
They are safety certified, target a broad range of frequencies and are RoHS complaint. They are lead free, mercury free, cadmium free and free of many more hazardous substances too.
How many GreenWave Filters do I require?
This is dependent on a variety of parameters, including the size of your house(rooms) and the amount of electronics you own.
According to Green Wave, a standard room with an average number of electronic devices will require approximately two filters. If, say, you have more electronics in the space, then you may require up to four filters.
For a standard 3 to 4 bedroom home, 16-20 filters may be enough to eliminate dirty electricity from the house.
Greenwave Filter Kits
Greenwave dirty electricity filters are sold individually or in kits and range in price from $30 to $672.00.
- Mobile Travel Kit (2 filters)
- 2 room starter kit (4 filters)
- 1 bedroom home kit (8 filters)
- 2 bedroom home kit (12 filters)
- 3 bedroom home kit (16 filters)
Here is a link where you can find each kit mentioned above.
If you are looking to reduce dirty electricity in buildings to create healthier spaces for living, learning and working then you can’t go wrong with adding filters. It’s always a good idea to purchase a dirty electricity meter to measure the effectiveness of your filters.
Greenwave Broadband EMI Meter
It’s always a good idea to measure the dirty electricity coming out of your outlets before and after you plug in the filters so you know they are working.
The Greenwave broadband emi meter is easy to use, all that you have to do is plug the meter into the electrical outlet you want to test.
This meter’s range is about 3kHz to 10 MHz. Its also include an audio feature so you can hear that difference.
2. Stetzer Filters
Stetzerizer Filters convert unclean electricity back into the original 60-hertz power that your gadgets may safely consume. They filter out all electric corruption between 4 and 150 kHz, the most harmful dirty electricity carried by your wiring.
People sensitive to EMF radiation will almost certainly notice a physical difference in the reduction of EMF radiation by exhibiting fewer EMF-related symptoms.
These filters do not utilize electricity and will not interfere with any of your home’s electronics.
How Many Does My Home Need?
When it comes to determining how many Stetzerizer filters you will need for your home, it will depend on the size of your house and the number of gadgets you own.
Do a test using one of the methods discussed above to determine how much dirty electricity you experience in your home before deciding on the number of filters to buy.
Stetzer recommends an average of about 20 filters for the standard household to filter out dirty electricity from the whole house. They also sell a 2 pack, 4 pack and 12 pack.
A good way to determine the number of filters required for your household is to buy, say, 12 filters at first, and then conduct tests using either Stetzer or GreenWave meters to determine how much dirty electricity remains, and then get more filters if needed.
Keep in mind when testing, you should:
- Unplug and switch off all the electronics in your house, including the circuit breaker on the electric panel.
- Take a reading on the meter to determine how much external dirty electricity you are exposed to before measuring the reading of your own house.
To effectively eliminate dirty electricity, you should make sure you do not have any issues with your electrical wiring system since this can be counterproductive even when you use filters.
Next, you can try eliminating a few gadgets that record the highest amount of dirty electricity readings, such as smart TVs and dimmer switches.
Do You Need a Stetzer Filter for Your House?
If you own any modern gadgets, then you need to get a dirty electricity filter because these electronics are going to cause surges in your electric current, which leads to harmful EMF Radiation.
If you stay close to a cell tower or in the city, you should consider purchasing a dirty electricity filter.
What Causes Dirty Power
Dirty electricity is a by product of using modern electronics. These devices manipulate how they use electricity and don’t use the standard 50/60 electricity as is and therefore create dirty electricity.
These devices use low voltage or higher frequency AC in order to operate. Instead of drawing power from wiring in a continuous and smooth flow of standard electricity these devices use spikes and erratic surges.
Common Sources
Dirty electricity is generated by many common devices, electronics, energy efficient lights and appliances. Here are some of the most common sources:
- TVs
- Dimmer switches for lights
- Laptops and computers
- Fluorescent light tubes and bulbs
- Wifi Modems and Routers
- Hair dryers
- Kitchen appliances like mixers and blenders
- Video game consoles
- Solar systems
- Cordless phones
- Fans that have multiple speeds
- Home entertainment systems
- SMART appliances and meters
- Battery chargers
- Modern Appliances
Is It Harmful
Once dirty electricity is created it’s potentially harmful and isn’t used. It spreads potentially harmful electromagnetic fields (EMF) throughout it’s environment.
There is more research being done everyday on the harmful effects of it. One researcher showed that the well being and learning environment of teachers and students was greatly improved and that dirty electricity was reduced by more than 90% by installing Graham Stetzer filters.
Other studies have shown that it directly disturbs human biological systems. It has been associated with irritability,mood, pain, ADHD, concentration, cancer, asthma, anxiety, fatigue, sleep issues, diabetes, depression, multiple sclerosis and more.
How Do You Fix It?
Fortunately there are some things you can do filter dirty electricity in your home. The easiest way for the average person to fix it is to install dirty electricity filters throughout your home and work environments if possible. This is the most cost effective, direct and practical way to clean up this kind of electro-pollution.
There are many filters available on the market these days that directly plug into the outlet on your wall and can filter the entire electricity circuit. If your work environment allows you to you can plug one in at your office too.
For those electricians out there or people who don’t mind hiring one they have filters that you can install directly into your circuit breaker that filter your entire house electricity.
How Much Do They Cost?
The price of a dirty electricity filter varies depending on the size and type, but typically ranges from $30 to $100. If you are looking at a whole house filter installed directly into your circuit breaker you will have to spend more money.
In Conclusion
Dirty electricity is a type of electrical pollution that can cause a variety of health problems. Filters can help to reduce or eliminate dirty electricity.
Different types of filters work in different ways, but all work to reduce or eliminate dirty electricity. Some filters are certified by independent third-party organizations, while others are not.
The average person is exposed to about 3 mG of dirty electricity per day. Dirty electricity has been linked to a number of health problems.
A single dirty electricity filter can reduce your exposure to dirty electricity by up to 99%. They are available in a variety of sizes and shapes to fit your specific needs.
They can be used in both residential homes and commercial settings. The installation of the filters is easy, all you have to do is plug them into the outlet unless you are having one like Satic installed directly into your electrical panel.
They lifespan depends on the manufacturer but typically they last about 10 years or more and require little to no maintenance. They don’t require any other special equipment and there aren’t any special features you have to worry about.
Dirty electricity filters can be an effective way to reduce your exposure to dirty electricity.
